Product Information

  • Servo Presses
  • Desktop Robots
  • SCARA Robots
  • Cartesian Robots

    • JC-3 Series

JC-3 Series

  • Basic Information
  • Product Lineup
  • Main Specifications

Model Configuration

Model Configuration
JC-3A00-0T3 JC-3A00-0H3 JC-3B01-0H4
Number of Axes 3 Axes Synchronous Control 3 Axes Synchronous Control 4 Axes Synchronous Control
Stroke X Axis(mm) 200/300/400/500/600 300/400/500/600 300/400/500/600
Y Axis(mm) 200/300 300/400/500 300/400/500
Z Axis(mm) 50/100/150/200 50/100/150/200 100/150
R Axis(deg) - - ±360
Drive Motor   Stepping Motor Stepping Motor Stepping Motor
X Axis Feedback Control Feedback Control Feedback Control
Y Axis
Z Axis Open Loop Control
R Axis - -
Maximum
Portable Load
Tool(kg) 4 8 3
Maximum Speed
<PTP Movement>
*1
X-Axis Stroke 200
300
400
500
600
300
400
500
600
300
400
500
600
X Axis(mm/s) 700 800 700 800 700 800
Y Axis(mm/s) 800 800 800
Z Axis(mm/s) 400 400 400
R Axis(deg/s) - - 900
R Axis Acceptable Moment
of Inertia (kg・cm2)
- - 90
Repeatability(mm)*2 X Axis(mm) ±0.02 ±0.02 ±0.02
Y Axis(mm) ±0.02 ±0.02 ±0.02
Z Axis(mm) ±0.02 ±0.02 ±0.01
R Axis(deg) - - ±0.008
External Dimensions
(excluding cables and protrusions)
W x D x H(mm)
Robot W:Y-Axis Stroke + 319
D:X-Axis Stroke + 309
H:Z-Axis Stroke + 357
W:Y-Axis Stroke + 426
D:X-Axis Stroke + 309
H:Z-Axis Stroke + 357
W:Y-Axis Stroke + 426
D:X-Axis Stroke + 309
H:Z-Axis Stroke + 334
Controller 170 x 310 x 300
Mass(kg) Robot Varies depending upon stroke combination.
Controller 7.5

*1 This value reflects the maximum portable load when measured with all the axes assembled. For information about acceleration rates, please refer to the speed & acceleration materials in the Catalog section of our Catalog and Diagram Download page. Maximum speed may be unreachable depending upon the tool attachment setup. The X and Y axes individual unit speed and acceleration are 800mm/s and 5000mm/s² respectively.
*2 Repeatability measured at a constant temperature, so absolute precision is not guaranteed.

  • These values are for standard models and may differ with specification modifications.
    Please contact us for details.

Common Specifications

Control Method PTP (Point to Point) control, CP (Continuous Path) control
Interpolation 3-dimensional linear and arc interpolation
Teaching Method Remote Teaching (JOG)/Manual Data Input (MDI)
Teaching System
  • Direct teaching using the optional teaching pendant
  • Off-line teaching with JR C-PointsⅡ software from a PC. Compatible for use with CAD-made graphic data (DXF, Gerber, jpeg).
Teaching
Pendant
Display
Measurement Units mm/inch
Languages Switch back and forth among these languages: Japanese・English・German・Italian・Spanish・French・Korean・Simplified Chinese・Traditional Chinese・Czech・Vietnamese.
Program Capacity 999 programs
Data Capacity Maximum 32,000 Points*3
Simple PLC Function Maximum 100 Programs 1,000 steps/Program
External Input/Output I/O-SYS*4*6 16 Inputs, 16 Outputs
I/O-1*4*6 8 Inputs, 8 Outputs
I/O-MT
(optional)
for auxiliary axes (pulse string input type*8) control,
control up to 2 axes
Fieldbus
(optional)
Choose CC-Link, DeviceNet, PROFIBUS, EtherNet/IP, PROFINET or CANopen
COM Port (RS232C) COM1, COM2, COM3: for external device control
MEMORY Port For USB memory connection
  • Read out and save teaching and customizing data
  • Upgrade system software
  • Update model settings data
LAN*5 For PC connection via the Ethernet
  • Robot control via control commands
  • Connection to (optional) PC software "JR C-Points II"
    (Send and receive teaching and customizing data, upgrade system software)
TPU Dedicated teaching pendant (optional) connector
SWITCHBOX Dedicated switchbox connector
EMG OUT For external safety circuit connection*9
I/O Built-in Power Supply (optional) DC24V
Power Source AC90~240V (single phase) 50/60Hz
+ external DC48V (depending upon facility supply)*7
Power Consumption 150W (AC Power Supply)
300W (DC48V, motor drive power supply)
Operating Environment Operating Temperature 040℃
Relative Humidity 2085% (without condensation)
Elevation Up to 1,000m
Reference Diagram

*3 Point data capacity reduces as the total function data setting/point job data/sequencer data increases, due the shared data storage area.
*4 When using an internal power supply, an (optional) built-in I/O power supply is required.
*5 LAN connection is 10BASE-T, 100BASE-TX.
*6 There are two types of I/O polarity: NPN specifications and PNP specifications.
*7 With the 4 Axes Specifications, the XY Axes are powered externally at 48V, while the ZR Axes use a 24V control power supply.
*8 We ask customers to please prepare their own control power supply, pulse motor and motor driver.
*9 We ask customers to please construct their own safety circuit.

  • We ship the robot disassembled, packing each axis as an individual unit. Please assemble the robot upon delivery.
  • In addition to the specifications listed above, other specifications may also be available. Please contact us for more information.
  • Optional specifications are available only when placing your order; no post-order modifications.
  • Specifications may change without prior notice to improve product quality.

Standard Accessories

  • Power Cable
  • TPU Short Connector
  • SW-BOX Short Connector
  • EMG-OUT Connector
  • Box Mounting Plate
  • Operation Manual (CD-ROM)

Optional Attachments

  • Teaching Pendant
    • ・With Emergency Stop Switch
    • ・With Emergency Stop/Enable Switch
  • Switchbox
    • ・With Initialization Switch
    • ・With Initialization Switch/Mode Changing Switch
    • ・With Intialization Switch/Purge Switch
    • ・With Initialization Switch/Mode Changing Switch/Purge Switch
  • Cable Set (for robot to controller connection: 3m/5m)
  • Cableveyor Set (for X Axis/Y Axis)
  • I/O-SYS cable, I/O-1 cable
  • Needle Adjuster
  • PC Software JR C-PointsⅡ (Windows® 7/ Windows® 8.1/ Windows® 10 compatible)

Catalog and Diagram Download Contact Us